Auto Repair Service

Free repair service information and advice.

brake master cylinder

Brake Master Cylinder: The Most Common Repair

  The most common type of brake repair lies within the hydraulics of the system. Brake fluid is vital to the brakes because it transfers force into pressure, which helps the other components of the braking system work correctly. The force needed to stop the car is far greater than the force applied when the operator of the vehicle presses their foot on the brake pedal. The fluid provides the hydraulic force needed to efficiently operate the brakes with the force needed. Often times, it needs to be flushed out of the car, and replaced because old fluid has a lower boiling point, and tends to attract moisture.

The excess moisture can cause rust, and is especially damaging to anti-lock braking systems. Mechanics recommend a flush every 30,000 miles, it is good preventative maintenance toward keeping the system working efficiently. Bleeding is simply letting some of the fluid out to remove the air pockets that have become trapped in the system. Checking the brake fluid can provide details of any required maintenance from refilling, to leaks.

Another common brake repair is replacing the brake pads. The pads lie within the disc and provide a buffer between the calipers and the rotors. When the brakes are applied, the caliper squeezes the pads into the rotor, which stops the vehicle. Although there isn’t a specific mileage milestone to indicate a need for new pads, the pads are equipped with a a small metal tab that will rub against the rotor and make a squealing noise when they have worn thin and need replacement. Ignoring this warning signal for too long can lessen braking efficiency and cause serious damage to the rotors.

  The master cylinder controls the volume of fluid that is forced through the system. When the master cylinder malfunctions, there is an internal leak that is not always immediately detected by brake fluid leaking from the car. Attention should be given to this component if the pedal slowly sinks to the floor when the pedal is applied, or if the operator must ‘pump’ the brakes in order for the pedal to return to normal pressure. A red warning light will also appear on the dashboard if there is a problem with the master cylinder. If leaking is more obvious, the problem my be with the tubes or hoses that carry the fluid from the master cylinder.

The braking system has many components working together that enable safe operation of a vehicle. Always pay attention to how the brakes feel when pressure is applied, and take the car to a certified mechanic for preventative maintenance. Never put off repairs to the braking system.

If you are experiencing problems with your brakes, you may be in need of a brake repair,

I, Fouzi thank you for subscribing and visiting my website. My Car Symptoms, is my new e-book subscribe now is  limited edition. If your car is in need for brakes replacement contact me at Fouzis Service Centre for free quotation and prices. I have special on brake pads and disc 20% discount, free wheel alignment check. Visit this auto parts store for brake master kit or complete brake master prices  click here.

Advertisements

29/11/2011 Posted by | Uncategorized | , , , , , , , | Comments Off on brake master cylinder

How To Change Brake Rotors

Wagner QC923 ThermoQuiet Ceramic Disc Brake Pad Set     

Car Brake Pads Replacement: What You Must Do

Brake pads are one of the most important parts of your vehicle that have direct effect on the performance of your vehicle-stopping system. Brake pads should be inspected regularly for the possibility of wear out. Most of the time, you can notice brake pad wear without having to remove the wheel. When the pads look thin, it indicates that they are almost worn out. You can also inspect the slot which is available in some types of brake pads. The fewer the slot remains, the more likely it wears out and needs change.

To change brake pads on your car, you need some car parts such as brake system cleaner, brake anti-squeal compound, high-temperature brake grease, and obviously new brake pads. You will also need some tools which include lug nut wrench, large C-Clamp, length of wire or bungee cords, jack and jack stands, wrench, socket, and Allen wrench or Torque wrench. The latter tools are depended on the caliper design. As dust from the brake system and brake fluid are harmful to your health, protect yourself with filtering mask, safety goggles, and possibly gloves.

After all the brake parts and tools are prepared, now you are ready to replace your pads. Arm yourself with a service manual for your car type since it is significant for a safe and correct replacement.

1. Park your car on a flat surface, open the hood and find the brake master cylinder which is usually placed on the firewall on the driver’s side. Protect painted areas around the master cylinder by covering them. You will also need to remove half of the reservoir fluid to prevent fluid overflow when new pads are installed. Brake fluid is poisonous, so never siphon it with your mouth. If you use a turkey baster for the job, never again use the appliance for cooking.

2. Remove the wheels where you will install the new brake pads by loosening the wheel lug nuts, raising the front or rear part of your car, and securely supporting it on jack stands.

3. After the wheels are off, use the wrench to loosen the bolts holding the calipers. Lift the caliper off the brake rotor after the bolts are removed. You will notice that the caliper will still be connected with the brake line. Never let the caliper hang by the brake line as it can cause line brake damage and brake failure. Secure the caliper using the bungee cords to a nearby suspension component.

4. Once the caliper is removed, pull out the brake pad from the caliper. Inside the caliper, you will notice a cylindrical piston coming out. Hold the piston to its original position using a C-Clamp by pressing its end against the piston.

5. Replace the old pad with the new one. Apply anti-squeal compound on both sides of the new pads and high temperature brake grease to the upper steering knuckle-to-caliper contact surface. Wait for a few minutes to let the coats to set up before putting back the brake pad and the caliper to their original place. Return all the other car parts and test the brake before bringing your car to roads.

Check your brake pads every 15,000 miles to figure out wear out. Need more auto tips? Visit our link today.

I, Fouzi thank you for your visit and subscribe for free information given to you. If you have any questions leave your comment. I will answer it. And if your car in need for brakes just contact me at Fouzis Service Centre.Free quotation and prices click here. . Subscribe for my new e-book is limited edition.

BRAKE PAD STORE RIGHT HERE. I prefer this store what about you?

AutoPartsEXPRESS 120x60 US Auto Parts Network Autoparts123.comTireBuyer.com

14/11/2011 Posted by | Uncategorized | , , , , , , , | Comments Off on How To Change Brake Rotors

Brake Wear

 

How to Know When It Is Time to Change Your Car Brake Pads and Shoes

Many drivers’ biggest fear is to be driving on the highway and coming to a stop, only to find that the brakes are no longer responding when they’re pressed on. The fact is, brake failure is a serious cause of collisions on the highway, and while it’s less common today than it used to be, it’s still a problem to be kept at bay for all motorists.

Older drum brakes were not nearly as reliable as today’s braking technology. Drum brakes were susceptible to seasonal and environmental factors which could decimate their ability to stop on time. In the heat of the summer or the cold of winter, drum brakes could easily stop responding or fail to provide the necessary friction to stop the vehicle in a timely manner.

Today’s newer anti-lock brakes don’t tend to fail nearly as often as the previous standard in braking technology used to. More sophisticated braking systems, along with advanced materials and design used on braking pads and shoes, have led to much safer and much more stable brakes that are better apt to stopping in any weather.

Here are a few signs it might be time to replace a piece or all of your braking system. Brakes and their parts are inexpensive pieces of an automobile that can be easily replaced without a lot of time and hassle, so it pays to make sure they’re in good working order (especially when your body will absorb whatever kinetic energy they fail to prevent you from hitting).

Troubling Noises

– They’re not always the same kind of bad noise, but you can usually hear when your brakes or their components have begun to wear down. Of course you’ll notice a sluggish, less complete stopping of your wheels when you press the brake pedal, but you’ll also hear grinding, squealing, or whining coming from your wheel well.

Poor Road Traction

– If you’ve ever depressed your brakes only to feel your car try, but fail to stop, you know how scary bad traction can be. Perhaps what’s most scary about these situations is that they tend to be more common in inclement weather, which is not how you want to discover a crucial flaw in your biggest safety system.

Brakes will keep you and your car safe, but they need some TLC with regular upkeep in order to continue doing their job. Make sure you get yours checked out before you find out they need work the hard way.

Your car’s braking system is probably the most important function of your vehicle. You’ll want to use a qualified car repair shop to inspect or replace brake parts. If you need a brake job, then stop in the Fouzis Service Center.

I fouzi thank you for your visit, and subscribe for free information. If your car in need for brake pads change contact me for free quotation and prices click here.

AutoPartsEXPRESS 120x60 US Auto Parts Network Autoparts123.comTireBuyer.com

22/10/2011 Posted by | Uncategorized | , , , , , | Comments Off on Brake Wear

Brake Repairs

Brake Repair: How To Find A Reliable Car Mechanic

FOUZIS SERVICE CENTREYour brakes are one of the most important parts of your car and need to be in good working order if you want to be safe. You need them in order to stop. Read these tips if you need to find a reliable brake repair technician.
You should hire a mechanic who has long-term experience fixing brakes. A good mechanic will let you know what the problem is and tell you how he can fix it. Keep in mind that many car mechanics offer free inspections, so take advantage of this service. You can find a good mechanic by surfing the internet, visiting websites and searching in the telephone book or online directories. Many auto repair service centers have websites, so visit them online if you want to find out more about their features. You can always contact them if you have questions.

If you have a tight budget, shop around. Call a few service centers or car repair mechanics and find out what kind of prices they charge. Some mechanics charge by the hour and others charge a flat fee for the work. Some car specialists charge reasonable fees; you can save a lot of money if you shop around until you find the best price. In addition, keep in mind that some shops can give you used parts for a cheaper price, so talk to someone about this option if you do not have a lot of money. You may be able to find a perfect used part for your vehicle.

When you are speaking with repair specialists and calling shops, find out if they offer warranties. With this service on your side, you will be covered if your brakes fail after the mechanic fixes them. If the professionals offer warranties on the work, make sure you get it in writing before you let anyone touch your car.

You should never let just anyone work on your car. Make sure the person you hire is trained, certified, and experienced. Competent car repair mechanics know what they are doing and will do a great job with your car. If you hire a certified mechanic, you will feel good knowing that someone who is trained and skilled in fixing cars is handing your repairs. You don’t really know what you will get if you visit a mechanic who is not certified, even if the price is better.

You can find out how good a mechanic or auto repair shop is by reading online reviews. Find out what the people are saying about the car repair specialists in your town. Many websites provide detailed consumer reviews.

Before you take your car to a mechanic or shop, find out what payment options you have. Ask if you can pay with your credit card, debit card, or a personal check. It is important to note that some shops offer financing and store credit cards.

You can prevent future car problems by doing your homework and seeking out a quality brake repair mechanic or auto repair service center. An experienced professional will fix your car troubles before they become catastrophic.

If you’re in need of Great prices and Wide Selection of Auto Parts and Accessories at “Auto Parts Warehouse” .Just click up here on the image.

If you’re in need of brake repair Fouzis Service Center has many qualified mechanics to service any problem you may be having. Subscribe for Free Information , News letters , Quotation and any Question about your car.

I, Fouzi owner of Fouzis Service Center, Thank you for visiting my website.

AutoPartsEXPRESS 120x60 US Auto Parts Network Autoparts123.comTireBuyer.com

13/08/2011 Posted by | Uncategorized | , , , , , | Comments Off on Brake Repairs

   

%d bloggers like this: